Group/ Entertainment Lighting/Kino Flo/Kino Flo MIMIK 120 Lighting Tile
Kino Flo / Lighting Tile
Kino Flo MIMIK 120 Lighting Tile
MIMIK 120 is a lighting fixture that takes its cue from the video signal. It lights talent and set elements in virtual production with extended spectral bandwidth and cinematic colour fidelity, applying higher tonal and colour rendering than the content it mirrors. It is a softlight first and a display second.
Patented Kino Flo technology translates an incoming RGB video signal into five individual emitters, warm white, cool white, red, green and blue. The tile generates real foreground lighting that synchronises with an LED volume rather than merely displaying an image. Because it runs off the same video signal it stays in sync with other displays, without the latency and mapping problems that come with DMX-mapped lighting.
A 30 kHz refresh rate and 16-bit depth support camera speeds to 900 fps with no flicker at low light levels. The carbon fibre frame keeps the tile light enough to reconfigure on set. Control runs through the Megapixel Helios video processor with no software or drivers to install. Tiles stack five high with no limit on width, link with corner blocks in two-way and four-way locking, and curve concave or convex with an attachment.
A Megapixel Helios video processor is required.
Key features
- Five emitters per pixel: warm white 2700 K, cool white 6500 K, red, green and blue
- 7200 pixels per tile at 10 mm pitch
- Carbon fibre frame, 12.5 kg per tile
- 8 magnetically attached LED display modules, front side serviceable
- Refresh rate 30 kHz, 900 frames per second, 16-bit minimum grey scale
- Max brightness calibrated to approximately 10,000 nits
- Stacks 5 tiles high with no limit to width
- Two-way and four-way corner block locking
- Concave and convex curving with attachment
- Controlled through Megapixel Helios, no software or drivers to install
- CE, UKCA, ETL and FCC certified
Specifications
| Manufacturer model | MIMIK 120 |
|---|---|
| Superseded code | MIM-120 |
| Power | 400 W maximum, 200 W average, varies with video content |
| CCT range | 2700 K warm white and 6500 K cool white emitters |
| LED engine | SMD 5050 black body, 5 LEDs per pixel |
| Controlled zones | 8 LED display modules per tile |
| Beam angle | 140 degrees horizontal and 140 degrees vertical viewing angle |
| Control protocols | Megapixel Helios video processor, 2 x PX1 receiver card |
| Circuit limit | Maximum 4 MIMIK tiles in one string on a 120 V 15 A circuit |
| IP rating | IP20, indoor |
| Dimensions | 1200 x 600 x 80 mm (47.2 x 23.6 x 3.2 in) per tile |
| Weight | 12.5 kg / 27.6 lb per tile |
| Photometrics | At D65: 14800 lux at 0.5 m, 3070 at 1.5 m, 1190 at 2.5 m, 621 at 3.5 m, 317 at 5 m. Operating temperature -10 to 45 C, 10 to 90 percent RH |